The geometry chart below applies to all Specialized Venge frames from the following:
- Years: 2019, 2020, 2021
- Models: S-Works Venge, Specialized Venge
- Frame material: Carbon
Frame Size | 49 | 52 | 54 | 56 | 58 | 61 |
---|---|---|---|---|---|---|
Suggested Rider Height (cm) | 155 to 163 | 163 to 170 | 170 to 175 | 175 to 180 | 180 to 188 | 188 to 196 |
Suggested Rider Height (ft) | 5’1″ to 5’4″ | 5’4″ to 5’7″ | 5’7″ to 5’9″ | 5’9″ to 5’11” | 5’11” to 6’2″ | 6’2″ to 6’5″ |
Stack (mm) | 378 | 383 | 387 | 398 | 405 | 411 |
Reach (mm) | 504 | 517 | 534 | 555 | 581 | 602 |
Top Tube, Horizontal (mm) | 508 | 531 | 540 | 562 | 577 | 595 |
Seat Tube (mm) | 455 | 480 | 495 | 518 | 537 | 567 |
Seat Tube Angle | 75.5º | 74º | 74º | 73.5º | 73.5º | 73º |
Head Tube (mm) | 104 | 115 | 133 | 153 | 180 | 200 |
Head Tube Angle | 71.75º | 72.5º | 73º | 73.5º | 73.5º | 74º |
BB Height (mm) | 266 | 266 | 268 | 268 | 268 | 268 |
BB Drop (mm) | 74 | 74 | 72 | 72 | 72 | 72 |
Fork Trail (mm) | 63 | 58 | 58 | 55 | 55 | 52 |
Fork Length (mm) | 363 | 363 | 363 | 363 | 363 | 363 |
Fork Offset (mm) | 47 | 47 | 44 | 44 | 44 | 44 |
Front Center (mm) | 574 | 577 | 579 | 591 | 606 | 613 |
Chainstay (mm) | 410 | 410 | 410 | 410 | 410 | 410 |
Wheelbase (mm) | 972 | 975 | 978 | 991 | 1005 | 1012 |
Standover Height (mm) | 736 | 756 | 773 | 795 | 817 | 841 |
Crank Length (mm) | 170 | 170 | 172.5 | 172.5 | 175 | 175 |
Handlebar Width (mm) | 400 | 420 | 420 | 420 | 440 | 440 |
Stem Length (mm) | 80 | 90 | 100 | 100 | 110 | 110 |
Seatpost Length (mm) | 300 | 300 | 300 | 390 | 390 | 390 |
The frame geometry measurements are explained in this article.
Source : Specialized
Specialized bikes
Alex Lee is the founder and editor-at-large of Mr. Mamil. Coming from a professional engineering background, he breaks down technical cycling nuances into an easy-to-understand and digestible format here.
He has been riding road bikes actively for the past 12 years and started racing competitively in the senior category during the summer recently.