Cannondale SystemSix Frame Geometry (2018-2023)

Written by : Mr Mamil
Last updated :

Disclosure : I may earn an affiliate commission when you purchase through links on this page.

Cannondale SystemSix
Cannondale SystemSix

The geometry chart below applies to all Cannondale SystemSix frames from the following:

  • Years: 2018, 2019, 2020, 2021, 2022, 2023
  • Models: LAB71, Hi-MOD, 1, 2, 3, 4
  • Frame material: Carbon
Frame Size47515456586062
Suggested Rider Height (cm)160 to 170165 to 175170 to 180177 to 187182 to 193187 to 198195 to 205
Suggested Rider Height (ft)5’3″ to 5’7″5’5″ to 5’9″5’7″ to 5’11”5’10” to 6’2″6’0″ to 6’4″6’2″ to 6’6″6’5″ to 6’9″
Stack (mm)500520540560580600620
Reach (mm)375381386392398403409
Top Tube, Horizontal (mm)514529544560576592609
Seat Tube (mm)385433482530553577600
Seat Tube Angle75.1°74.7°74.3°73.9°73.5°73.1°72.7°
Seat Tube Angle Effective74.5°74.1°73.7°73.3°72.9°72.5°72.1°
Head Tube (mm)88114128149172193214
Head Tube Angle71.2°71.2°73.0°73.0°73.0°72.9°72.9°
Standover Height (mm)680723762798821843863
Wheelbase (mm)974989975987100010121024
Front Center (mm)582595581593605617629
Chainstay (mm)405405405405405405405
BB Drop (mm)79747272696969
BB Height (mm)261266269269271271271
Fork Offset (mm)55554545454545
Fork Trail (mm)58585757575858
Cannondale SystemSix (2018-2023) frame geometry chart

The frame geometry measurements are explained in this article.

Source : Cannondale