The geometry chart below applies to all BMC Teammachine SLR frames from the following:
- Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023
- Models: BMC Teammachine SLR01, Teammachine SLR
- Variants: Ltd, ONE, TWO, THREE, FOUR, FIVE, SIX, SEVEN
- Frame material: Carbon
| Frame Size | 47 | 51 | 54 | 56 | 58 | 61 |
|---|---|---|---|---|---|---|
| Suggested Rider Height (cm) | <166 | 166 to 174 | 172 to 180 | 178 to 186 | 184 to 192 | >190 |
| Suggested Rider Height (ft) | Below 5’5″ | 5’5″ to 5’9″ | 5’8″ to 5’11” | 5’10” to 6’1″ | 6’0″ to 6’4″ | Above 6’3″ |
| Stack (mm) | 506 | 530 | 550 | 565 | 584 | 608 |
| Reach (mm) | 367 | 377 | 386 | 392 | 401 | 409 |
| Top Tube (mm) | 517 | 534 | 549 | 559 | 574 | 589 |
| Seat Tube (mm) | 423 | 468 | 504 | 524 | 545 | 574 |
| Seat Tube Angle | 73.5º | 73.5º | 73.5º | 73.5º | 73.5º | 73.5º |
| Head Tube (mm) | 110 | 130 | 145 | 165 | 184 | 210 |
| Head Tube Angle | 71.5º | 71.5º | 72.3º | 72.3º | 72.3º | 72.3º |
| Chainstay (mm) | 410 | 410 | 410 | 410 | 410 | 410 |
| Front Center (mm) | 568 | 586 | 589 | 599 | 614 | 630 |
| Wheelbase (mm) | 968 | 986 | 989 | 1000 | 1015 | 1030 |
| BB Drop (mm) | 69 | 69 | 69 | 69 | 69 | 69 |
| Fork Length (mm) | 368 | 368 | 368 | 368 | 368 | 368 |
| Fork Offset (mm) | 48 | 48 | 43 | 43 | 43 | 43 |
| Fork Trail (mm) | 63 | 63 | 63 | 63 | 63 | 63 |
| Crankarm Length (mm) | 170 | 170 | 172.5 | 172.5 | 175 | 175 |
| Stem Length (mm) | 90 | 90 | 100 | 110 | 110 | 120 |
| Stem Angle | -12.5º | -12.5º | -12.5º | -12.5º | -12.5º | -12.5º |
| Bar Width (mm) | 400 | 420 | 420 | 420 | 420 | 440 |
| Bar Drop (mm) | 125 | 125 | 125 | 125 | 125 | 125 |
| Bar Reach (mm) | 70 | 70 | 70 | 70 | 70 | 70 |
| Post Offset (mm) | 15 | 15 | 15 | 15 | 15 | 15 |
| Standover Height (mm) | 717 | 752 | 779 | 797 | 817 | 843 |
| Seatpost Length (mm) | 330 | 380 | 380 | 380 | 380 | 380 |
Each of the geometry measurements is explained in detail in this article.
Source : BMC