The geometry chart below applies to all Standert Kreissäge frames from the following:
- Years: 2021, 2022, 2023
- Models: Standert Kreissäge RS, Kreissäge
- Frame material: Scandium
| Frame Size | 48 | 50 | 52 | 54 | 56 | 58 | 60 |
|---|---|---|---|---|---|---|---|
| Suggested Rider Height (cm) | 150 to 163 | 158 to 170 | 166 to 177 | 170 to 180 | 175 to 185 | 182 to 192 | 188 to 198 |
| Suggested Rider Height (ft) | 4’11” to 5’4″ | 5’2″ to 5’7″ | 5’5″ to 5’10” | 5’7″ to 5’11” | 5’9″ to 6’1″ | 6’0″ to 6’4 | 6’2″ to 6’6″ |
| Inseam (cm) | 76 to 82 | 77 to 83 | 78 to 84 | 80 to 86 | 82 to 88 | 84 to 90 | 85 to 91 |
| Inseam (inch) | 29.9″ to 32.3″ | 30.3″ to 32.7″ | 30.7″ to 33.1″ | 31.5″ to 33.9″ | 32.3″ to 34.6″ | 33.1″ to 35.4″ | 33.5″ to 35.8″ |
| Stack (mm) | 521 | 530 | 537 | 544 | 560 | 580 | 595 |
| Reach (mm) | 370 | 380 | 386 | 388 | 390 | 398 | 410 |
| Top Tube, Effective (mm) | 495 | 512 | 525 | 544 | 555 | 570 | 586 |
| Seat Tube (mm) | 480 | 490 | 500 | 530 | 550 | 571 | 586 |
| Seat Tube Angle | 76.5º | 76º | 75.5º | 74º | 73.5º | 73.5º | 73.5º |
| Head Tube (mm) | 110 | 115 | 120 | 130 | 145 | 166 | 181 |
| Head Tube Angle | 71.25º | 72.5º | 73º | 73º | 73.5º | 73.5º | 73.5º |
| Chainstay (mm) | 405 | 405 | 405 | 410 | 410 | 410 | 410 |
| Wheelbase (mm) | 969 | 970 | 974 | 984 | 986 | 1000 | 1016 |
| Standover Height (mm) | 741 | 745 | 758 | 778 | 794 | 816 | 830 |
| Crank Length (mm) | 165 | 170 | 170 | 170 | 172.5 | 172.5 | 172.5 |
| Stem Length (mm) | 100 | 110 | 110 | 120 | 120 | 130 | 130 |
| Handlebar Width (mm) | 38 | 38 | 38 | 40 | 40 | 42 | 42 |
| Seatpost Offset (mm) | 0 | 0 | 0 | 0 | 20 | 20 | 20 |
The frame geometry measurements are explained in this article.
Source : Standert