BMC Teammachine ALR Frame Geometry (2018-2023)

Written by : Mr Mamil
Last updated :

Disclosure : I may earn an affiliate commission when you purchase through links on this page.

BMC Teammachine ALR ONE SRAM Rival eTap AXS
BMC Teammachine ALR

The geometry chart below applies to all BMC Teammachine ALR frames from the following:

  • Years: 2018, 2019, 2020, 2021, 2022, 2023
  • Variants: ONE, TWO
  • Frame material: Aluminum
Frame Size4751545760
Suggested Rider Height (cm)Below 168166 to 174172 to 180178 to 188Above 186
Suggested Rider Height (ft)Below 5’6″5’5″ to 5’9″5’8″ to 5’11”5’10” to 6’2″Above 6’1″
Stack (mm)515539559583610
Reach (mm)365374383391402
Top Tube (mm)518534549564583
Seat Tube (mm)442505535565600
Seat Tube Angle73.5º73.5º73.5º73.5º73.5º
Head Tube (mm)118138157182210
Head Tube Angle70.5º72º72.5º72.5º72.5º
Chainstay (mm)410410410410410
Front Center (mm)571575585601620
Wheelbase (mm)97197598510011020
BB Drop (mm)6969696969
Fork Length (mm)369369369369369
Fork Offset (mm)41.641.641.641.641.6
Fork Trail (mm)7666636363
Crankarm Length (mm)170170172.5172.5175
Stem Length (mm)90100110110120
Stem Angle± 8º± 8º± 8º± 8º± 8º
Bar Width (mm)400420420420440
Bar Drop (mm)125125125125125
Bar Reach (mm)7070707070
Post Offset (mm)1515151515
Standover Height (mm)705751778804835
Seatpost Length (mm)300330330330330
BMC Teammachine ALR (2018-2023) frame geometry chart

Each of the geometry measurements is explained in detail in this article.

Source : BMC